Disable Keyboard Break on SUN Ultra?
Temporary:
# kbd -a disable
Permanent:
Modify the /etc/default/kbd file, by removing the # from the entry:
#KEYBOARD_ABORT=enable
and changing it to:
KEYBOARD_ABORT=disable
PlaatSoft is a christian non profit organisation
Disable Keyboard Break on SUN Ultra?
Temporary:
# kbd -a disable
Permanent:
Modify the /etc/default/kbd file, by removing the # from the entry:
#KEYBOARD_ABORT=enable
and changing it to:
KEYBOARD_ABORT=disable
SUN Storedge 3310 notes:
Management tool for external SCSI disk
# sccli
SCSI Drivers reinit if not visible with format command:
# devfsadm
of
# reboot -- -r
UFS format
mkfs -F ufs /dev/rdsk/c2t0d0s2 <LUN 1> <Block amount see format> mkfs -F ufs /dev/rdsk/c2t0d1s2 <LUN 2> <Block amount see format> mkfs -F ufs /dev/rdsk/c2t0d2s2 <LUN 3> <Block amount see format> mkfs -F ufs /dev/rdsk/c2t0d3s2 <LUN 4> <Block amount see format> mkfs -F ufs /dev/rdsk/c2t0d4s2 <LUN 5> <Block amount see format>
Show SUN hardware PCI info:
# prtconf -v
Show SUN harddisk info
# prtvtoc /dev/dsk/c1t0d0s0
jumpstart Logging
\var\tmp
Jumpstart activate on source server
ssh
# init 0
telnet
sc> break or on SUN keyboard Stop – A
sc> console -f
ok> boot net – install
or
sc> reset
sc> break (paar keer)
sc> console -f
ok> boot net – install
HAB Add jumpstart Node:
./addhabnode.sh nlnwhabgs03-e0 192.168.0.195 00:03:ba:5a:2c:f9 cm03 gs_prof
./addhabnode.sh nlnwhabwe03-e0 192.168.0.194 00:03:ba:5a:31:6d cm03 we_prof
#CM02
./addhabnode.sh deduhabbe01-e0 10.2.211.4 00:03:ba:5a:2d:21 10.2.211.11 be_prof
HAB Jumpstart flow:
CM01
– in.rarp process
/etc/ethers (MAC -> hostname )
/etc/hosts (hostname -> IP adres)
– inetd deamon must run!
– rpc.bootparam process
/etc/bootparams (IP adres -> hostname)
– tftpboot (Solaris 2.8 Image)
cd /opt/jumpstart/jumpstart
/rules
– hostname -> hab profile
/rules.ok
– Syntax check of rules file.
– run check.sh to create this file.
/
– Install OS
– Delete not needed SUN packages
/complete.sh
– Create jumpstart_profile file
– Set Console cable settings
– Create cmg user
– Set mac address for multipathing
– Set not router
– Copy /config/host file.
– Copy /config/netmasks file.
– Copy /config/
– Copy /config/snmpd.conf file
– Copy /config/syslog.conf file
– Enable login as root without prompt for password on console
– Disable keyboard break
– Append /usr/local/bin to PATH
– Uncomment SUPATH
– Append /usr/local/sbin and /usr/local/bin to SUPATH
– Make sysidcfg readonly for root
– Set some TCP/IP Settings
– Copy /scripts/general/S99_stage_startup -> /etc/rc2.d
– Copy 0_stage /etc/jumpstart_stage
– Copy /config/bashrc -> .bashrc
– Copy /config/profile -> .profile
– Insert correct hostname in nodename
/scripts/general/security_before.sh
– Allow root to set yp ftp sessions
– Set display locktimeout to 15 minutes
– Set maximun number of login to 5
– Create logfiles for su and login
– Turn off useless lines in inetd.conf
– Set permission and owner of xhost file
– Set kernel parameters
– Prevent IP Spoofing
– Switch off S88sendmail
– reboot
SUN Enterprise 250 / 248 MHZ / 256 MB
[Feb 14 10:01:48 UTC] Automatic processor type detection found an UltraSPARC-II processor.
[Feb 14 10:01:48 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[Feb 14 10:02:07 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.52 [501,916 keys/sec]
[Feb 14 10:02:26 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.69 [2,823,340 nodes/sec]
SUN Ultra 10 / 333 MHz / 512 MB
[Feb 14 09:59:21 UTC] Automatic processor type detection found an UltraSPARC-IIi processor.
[Feb 14 09:59:21 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[Feb 14 09:59:39 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.15 [685,418 keys/sec]
[Feb 14 09:59:58 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.84 [3,854,463 nodes/sec]
SUN Ultra 10 / 440 MHZ / 512 MB
[May 01 05:29:15 UTC] Automatic processor type detection found an UltraSPARC-IIi processor.
[May 01 05:29:15 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[May 01 05:29:33 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.23 [908,269 keys/sec]
[May 01 05:29:53 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.91 [5,123,975 nodes/sec]
SUN Blade 100 / 500 MHz / 512 MB
[Feb 14 09:59:21 UTC] Automatic processor type detection found an UltraSPARC-IIe processor.
[Feb 14 09:59:21 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[Feb 14 09:59:39 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.15 [1,101,418 keys/sec]
[Feb 14 09:59:58 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.84 [5,231,463 nodes/sec]
SUN Blade 1000 / 750 MHZ / 1 GB
[May 01 05:34:12 UTC] Automatic processor type detection found an UltraSPARC-III processor.
[May 01 05:34:12 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[May 01 05:34:31 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.21 [1,557,063 keys/sec]
[May 01 05:34:50 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.59 [8,394,930 nodes/sec]
SUN Fire 210 / 1 GHZ / 4 GB
[Feb 14 10:15:19 UTC] Automatic processor type detection found an UltraSPARC-IIIi processor.
[Feb 14 10:15:20 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[Feb 14 10:15:38 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.06 [2,079,802 keys/sec]
[Feb 14 10:15:57 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.43 [11,217,790 nodes/sec]
SUN Fire 240 / 1 GHZ / 4 GB
[Feb 14 10:05:39 UTC] Automatic processor type detection found an UltraSPARC-IIIi processor.
[Feb 14 10:05:39 UTC] RC5-72: using core #5 (AnBe 2-pipe).
[Feb 14 10:05:58 UTC] RC5-72: Benchmark for core #5 (AnBe 2-pipe) 0.00:00:16.61 [2,088,402 keys/sec]
[Feb 14 10:06:17 UTC] OGR-P2: Benchmark for core #0 (GARSP 6.0) 0.00:00:16.64 [11,263,969 nodes/sec]